2 Wire Alarm Panels
LS400 Kit
LY52-000-33
The LS400 is an indoor system based upon patented technology to give good level of protection and reliability. It is a fuse-less system with special electronic circuitry for short circuit protection. It is idea for DIY installations, easy to install and operate, with no special tools or training required.
General Specifications
| Control Panel Specifications | 4 programmable zones |
| Arming/Disarming | Through on board keypad |
| Walk Test | Visual on all zones |
Programmable Functions
| Full guard & part guard |
| 4 programmable zones |
| Timed entry/exit, walk through, instant, chime |
| Codes: 1 user, 1 silent (duress) if dialler fitted. |
Programme Timers
| Full guard entry/exit delay 15, 30 or 45 seconds |
| Part guard exit delay 15, 30 or 45 seconds |
| Siren duration 1, 3 or 10 minutes |
Power Supply Adaptor
| Primary mains adaptor voltage rating | 230Vac, 50Hz, 10Watt |
| Secondary | 15Vac, 900mA |
| Battery back up | 8 X 1.5V, size AA alkaline batteries. |
Alarm System Kit Contents
| 1 X LS400 two-wire alarm control panel |
| 2 X Two-wire PIR |
| 4 X Two-wire magnetic contacts |
| 1 X Two-wire external bell box |
| 1 X LS400 user & installation manuals |
| 1 X 50 meters flat twin core wire |
| 1 X External mains adaptor |
| Cable clips, wall plug & screws |
European Standards
| Conforms to European law (EU) Low Voltage Directives LVD 73/23/EEC (amended 93/68/EEC) and Electro-magnetic Compatibility (EMC) 89/336/EEC (Amended by 92/31/EEC and 93/68EEC) RoHS |
Two Wire PIR Specification
| Sensor | Dual element pyro |
| Digital pulse count | 1, 2 & 4 jumper selectable |
| LED | enabled via jumper |
| Adjustable lens | either wide angle or long range |
| Alarm period | 2-3 seconds |
| Mounting height | 2m |
| Operating temperature | -0 to + 40ºC |
| Angle | 105º X 110º |
| Distance | 15 meters |
| Zone Number | 64 |
| Storage temperature | -10 to + 50ºC |
| Plastic housing material | ABS |
| Dimensions | 100mm X 65mm X 45mm |
| Weight | 100g |
Two Wire External Bell Box Specification
| Sound output | 110dB at 1 meter |
| Housing material | ABS |
| Colour options | white body, blue lens |
| Dimensions | 160mm X 114mm X 50mm |
SL6600 LCD Remote Keypad
| Operating Voltage | 12Vdc |
| LCD light off | 16.7mA |
| Wiring | 4 core multi stranded 7 X 0.20m² |
| Dimensions | 135 X 80 X 30mm |
Electrical Specifications
| Quiescent current | 25mA |
| Alarm Current | 150mA |
| Auxiliary voltage output | 13.5Vdc |
| Switched positive voltage | When low: 1.0Vdc, When high 12Vdc |
| Bell voltage output | 12Vdc |
| Speaker voltage output | 12Vdc |
| Internal sounder | 0.25 watts 32 ohms |
| Positive loop threshold (zones1-7/tamper) | Minimum open resistance: 70K, Maximum closed resistance: 10K |
| Negative loop threshold (system tamper) | Minimum open resistance: 110K, Maximum closed resistance: 20K |
Two Wire External Bell Box Specification
| Sound output | 110dB at 1 meter |
| Housing material | ABS |
| Colour options | white body, blue lens |
| Dimensions | 160mm X 114mm X 50mm |
Downloads
 |
Data Sheet |
|
Instructions |