2 Wire Alarm Panels
LS15C4X Wireless Convertor Kit
LY52-027-44
The wireless convertor kit consists of a convertor and several wireless detectors. The convertor may be connected to a hardwire control panel and act as a wireless extension of the security system. There are no limits to the number of sensors that can be used on each zone. The maximum number of hardwired zones that can be connected to the convertor is 4. Each zone can be selected as either N/O or N/C.
- Converts 4 Hardwire Zones To Wireless
- Unlimited Number Of Sensors On Each Zone
- Sensor Low Battery Indication
- Fully Supervised System Tamper
- Zones Programmable Either N/O or N/C
Alarm System Kit Contents
| 1 X LS15C4X wireless convertor |
| 1 X LS1500X wireless PIR |
| 1 X LS1501 wireless magnetic contact |
| 1 X LS1506X wireless zone control key fob |
| 1 X LS15C4X installation manual |
| Screws & wall plugs |
LS15C4X Wireless Convertor Specifications
| 4 X Wired zone inputs N/O or N/C |
| 1 X Power supply input 12Vdc |
| 1 X System tamper Input N/C |
Programming
| Zone type from control panel selectable either N/C or N/O for each zone |
| Dip switch to pair sensors with convertor |
Indicators
| Zone activation LED’s |
Electrical
| Zone activation open or closed time | 2 seconds |
| Current consumption quiescent | 40mA |
| Voltage input | 12Vdc |
| Radio system | 433Mhz super heterodyne type narrow band receiver |
Environmental
| Operating Temperature | -0ºC - + 40ºC |
| Storage temperature | -20ºC - + 60ºC |
| Maximum humidity | 95% non-condensing |
Physical
| Dimensions | 150mm X 100mm X 30mm |
| Housing material | ABS |
Wireless PIR
| Sensor | Dual element pyro |
| Number per zone | Unlimited |
| Tamper switch | Selectable enabled/disabled |
| Zone | 1-4 selectable via pin header |
| DIP switch | to pair with convertor |
| Mounting height | 2m |
| Operating temperature | -0 to + 40ºC |
| Angle | 105º X 110º |
| Distance | 12 metres |
| Transmitting range | 110 metres open area |
| Batteries | 1 X 9V PP3 alkaline battery |
| Battery life | Approximately 2 years |
| Low battery indication | Audible |
| Plastic housing material | ABS |
| Dimensions | 100mm X 65mm X 45mm |
| Weight | 100g |
Wireless Magnetic Door/Window Contact
| Number per zone | Unlimited |
| Tamper switch | Selectable enabled/disabled |
| Zone | Selectable via pin header |
| DIP switch | to pair with convertor |
| Hardwired terminals | N/C for connecting wired magnetic contact |
| Maximum gap distance | 10mm |
| Transmission range | 110 meters open area |
| Battery | 1 X 9V PP3 alkaline battery |
| Battery life | Approximately 2 years |
| Low battery indication | Audible |
| Plastic housing material | ABS |
Wireless Key Fob
| Wireless transmitter | Unset/set zones 1-3 |
| Maximum number per system | Unlimited |
| Transmission indicator | LED |
| Transmission range | 110 meters open area |
| Battery | 1 X 12V 27A alkaline battery |
| Battery life | approximately 3 years |
European Standards
| Conforms to European law (EU) Low Voltage Directives LVD 73/23/EEC (Amended 93/68/EEC) and Electro-magnetic Compatibility (EMC) 89/336/EEC (Amended by 92/31/EEC and 93/68EEC) RoHS |
Downloads
| Data Sheet | |
| Instructions |