2 Wire Alarm Panels

LS800S Kit

LY52-035-44

The LS800S is an advanced security system which is both easy to install and operate. This 'user friendly' system incorporates our patented two-wire technology and latest infrared design to ensure no false alarms through incorrect operation or installation.

General Specifications
Control Panel Specifications 8 pre-programmed zones
Arming/Disarming Using remote infrared key fob, maximum 8 per system.
Pre-programmed Zone Types Instant, delay, delay follower, omitted
Programmable Functions Adding additional infrared remote key fobs.
Walk Test Zones 1-8, tamper, PA, mains power, battery in use, day/off, part arm, learn
Panel LED Indicators Instant, delay, delay follower, omitted
Environmental Specification
Operating Temperature -0ºC - + 40ºC
Storage temperature -20ºC - + 60ºC
Maximum humidity 95% non-condensing
Power Supply Adaptor
Primary mains supply 230Vac, 50Hz
Secondary 16Vac
Mains Fuse 3 Amp 250V
Battery back up 1.3 - 2.2Ah 12vdc sealed lead acid battery
Programmable & Fixed Timers
Entry delay 15 or 30 seconds
Exit delay 30 seconds
Siren duration 20 minutes
Power Supply Adaptor
Primary mains adaptor voltage rating 230Vac, 50Hz, 10Watt
Secondary 15Vac, 900mA
Battery back up 8 X 1.5V, size AA alkaline batteries.
Physical Specification
Dimensions 285mm X 210mm X 60mm
Housing material ABS
Alarm System Kit Contents
1 X LS800S two-wire alarm control panel
2 X Two-wire PIR
3 X Two-wire magnetic contacts
1 X Infrared remote key fob reader
2 X Infrared remote key fobs
1 X LS800S user & installation manuals
Screws & wall plugs
European Standards
Conforms to European law (EU) Low Voltage Directives LVD 73/23/EEC (amended 93/68/EEC) and Electro-magnetic Compatibility (EMC) 89/336/EEC (Amended by 92/31/EEC and 93/68EEC) RoHS
Wire Magnetic Specification
Surface mount 2 screw terminals
Switch dimensions 65mm X 11mm X 11mm
Maximum gap distance 8mm
Plastic housing ABS
Infrared Key Fob
Type infrared signal transmitter 3 button operation Arm, Part Arm and Off
Maximum number per system 8
Operational distance 20 meters
Battery 3V CR2016
Housing ABS
Two Wire Infrared Remote Reader Specification
Voltage input 12Vdc (non-polarity)
LED indication Power indication, Part arm or alarm hold status
Sound Entry/exit, delay, arm/disarm, confirmation
Number per system 3 maximum
Housing material ABS
Two Wire PIR Specification
Type Dual element pyro sensor
Digital pulse count 1, 2 & 4 jumper selectable
LED enabled Via jumper
Adjustable lens Either wide angle or long range
Alarm period 2-3 seconds
Mounting height 2m
Operating temperature -0 to + 40ºC
Angle 105º X 110º
Distance 15 meters
Zone Number 64
Dimensions 100mm X 65mm X 45mm
Weight 100g
Kit Features
No complicated user key buttons on the LS800S Control panel, so no user programming required.
All functions of this advance system are operated with the coded Infrared Remote Key Fobs.
The Infrared Remote Keys employ anti grabbing secret codes and are individually programmed into the panel. A total of 8 Infrared Remote Key Fobs can be registered for each system.
Expandable by adding an optional Infrared Remote Key Fob Reader. Each Two-Wire intruder zone can connect two PIR’s 8 Zone advance patented two-wire alarm control panel, 3 magnetic contacts and 5 two wire intruder zones providing ample security features, including remote personal panic alarm and 24 hr tamper detection, sufficient for most if not all domestic environments.
The LS800S panel comes withy an intelligent electronic design. Which has full circuit protection with no need for a fuse.
Easy installation using the two-wire connection to detectors, infrared remote key fob reader, magnetic contacts also optional external siren/strobe and voice dialler.